6 Steps For Efficient Gun Cleaning

6 Steps For Efficient Gun Cleaning

These are the 6 most crucial steps to gun cleaning:

Step 1. ALWAYS make sure the gun is unloaded and pointed in a secure direction!

Step 2. Carefully take gun aside, making sure to keep track of all parts. Please reference your owners guide for detailed instructions on find out how to disassemble weapon. For many over/unders, when the action is closed, you remove the forestock (wooden half where your entrance hand goes beneath the barrel) by pulling down on the lever on the forestock. With the forestock off, you open the action of the gun and pull up and forward on the barrels (watch out to not let the barrels fall off the gun and to the ground as soon as the action is open). You now have three distinct items, the receiver (stock and set off meeting), the barrels, and the forestock. (Additionally, reference our gun cleaning video to observe alongside visually).

Step 3. Clear your weapon with a solvent (reminiscent of Hoppe's 9). Inside the barrels, use a bore brush or a rod with a patch with solvent utilized to the patch. (wantable pushing from the breach to the entrance of barrels (the same direction the shot/slug travels). Then use a clear dry patch and push that patch by the barrels. Proceed this alternating process utilizing clean patches (first with solvent after which without) till the patches now not come out dirty. Use a toothbrush with solvent to wash different metal components of gun to remove accumulated residue/deposits/"gunk".

Step 4. Remove any remaining solvent from surfaces. Wipe down the firearm and all of the elements to remove any residual solvent (which if left on metal may be harmful).

Step 5. Wipe down metal components with light coat of oil/lubricant/rust inhibitor. To guard the firearm and help it function correctly, wipe down metal elements with a light coat of gun oil or lubricant akin to silicone or RemLube by Remington. Use the lubricant/oil sparingly. A bit goes a long way. If the storing the gun, try to not leave fingerprints on it. While the fingerprints will likely not do anything to impact the function of the gun, they can be unpleasant and the oils on your skin could mar the finish of the metal.

Step 6. Reassemble weapon and verify that it is functioning properly. Holding the receiver horizontal and with the barrels at a forty five degree angle to the ground, slide the barrels down onto/into the receiver until the "hook" on the bottom of the barrel(s) catches in the receiver. Lift up on the entrance of the barrels until they lock into place. Now reattach the forestock. With the small latch on the forestock open, slide the forestock into place and easily shut the latch. Then open the breach of the gun and close it once more to make sure reassembly was achieved correctly. All elements ought to move easily with none excess liquids/oils/and pistol cleaner so forth seen on any half(s) of the gun. Do NOT use undue force on the weapon. Likelihood is if you have to use a lot (if any) muscle, you are doing something incorrectly.

716 Riverway Drive Suite 1000-1050
Las Vegas, NV, 89113

Follow Us


(C) 2015 Monev Software LLC / JoomlaXTC.

Disclaimer: This site is purely for demo use only and all the content relating to products and manufacturers are for demonstration purposes only. All images and logos are copyrighted to their respective owners.

Joomla! is Free Software released under the GNU/GPL License. Joomla is a trademark of Open Source Matters and the name is used under a limited license from Open Source Matters in the United States and other countries. Joomlaxtc.com / Monev Software LLC is not affiliated with or endorsed by Open Source Matters or the Joomla! Project.